Guangzhou Leading Diamond Tools Co., Ltd.
Home > Products >Machine and Equipment >Hand Held Air And Power Tools

Electric Variable Speed Wet Stone Polisher WSP-3011

We offer the popular WET grinders and polishers for natural stone and concrete countertops. Water offers two purposes in the grinding/polishing of natural stone and concrete countertops

  • Detailed Specification
  • FAQ

    Electric Variable Speed Wet Stone Polisher WSP-3011


    Brief introduction

    1. We offer the popular wet grinders and polishers for natural stone and concrete countertops. Water offers two purposes in the grinding/polishing of natural stone and concrete countertops:

       a) To bind the granite dust into a slurry

       b) To act as an evenly distributed film of molecules sandwiched between the grinder/polishing head and the natural stone.

    2. This hydroplaning results in a smooth surface treatment and extends the life usage of the diamond abrasives that are used with the grinders/polishers. All WET grinders and polishers are equipped with a ground fault circuit interrupter (GFCI) to ensure safe operation in wet environments.

    3. The WSP-3011 has its advantages:

       a) VTC electronic speed control .even at high load conditions to maintain rated speed.

       b) Humanity designed handle

       c) Ground fault circuit

       d) Central water feed

       e) Splash guard


    Feature:

    1. Constant Power Constant Speed.

    2. Use for wet or dry polishing of marble, granite, stone and concrete surface with wet or dry diamond polishing pads.

    3. Quick water connectors and the C-Handle for easy operation.

    4. The machine will be equipped with GFCI (Ground Fault Circuit Interrupter) safety feature which will goes off when water enters inside the machine cover and preventing the operator from receiving electric shocks.

    5. The RPM range reduces heat build-up when polishing engineered stone, which eliminates burning or scorching the work piece.

    6. Compact design for hand held but it's powerful working.


    Specification:

    Item No.: WSP-3011

    Voltage: 220v/110v 

    Output Power: 900w 

    Max.disc Diameter: 4"/100mm - 5"/125mm 

    No-load Speed: 500-4500rpm 

    Thread: M14 or /5/8"-11 

    Material  of Spindle Coil: Copper

    Gross /Net. Weight:  5.0KG/4.5KG 

    Packing Size & Piece: 57*37*30cm/6PCS 


    Details Images:

    Electric Variable Speed Wet Stone Polisher WSP-3011

    Electric Variable Speed Wet Stone Polisher WSP-3011

    Electric Variable Speed Wet Stone Polisher WSP-3011


    Accessories

    Electric Variable Speed Wet Stone Polisher WSP-3011

    Carbon Brush: 1 set 

    Big Wrench:  1 pc

    Wrench:  1 pc 

    Handle:  1 pcs

    Water Pipe: 1 pc 

    Mud Mask: 1 pc 


    Note:

    1. Do not force the power tool.

    2. Do not use tool if switch does not turn it on or off.

    3. Disconnect the plug from power source before making any adjustments, changing accessories,or storing the tool.

    4. Store idle tools out of the reach of children and not  allow persons unfamiliar  with the  power tool or these instructions to operate the power tool.

    5. Maintain power tool.

    6. Keep cutting tools sharp and clean

    7. Use the power tool, accessories and tool bots etc. om accordance with these instructions and in the  manner intended for the particular type of power tool,taking into account the working conditions and the work to be performed.

Your Questions and Comments are Important to Us.

Fill in the Following Form, or Reach Us by Phone or E-mail.

Contact Us
Get in Touch
Follow Us

Copyright © Guangzhou Yulin Leading Co., Ltd
All Rights Reserved  

sitemap
Top