Guangzhou Leading Diamond Tools Co., Ltd.
Home > Products >Machine and Equipment >Hand Held Air And Power Tools

Electric Variable Speed Wet Stone Polisher WSP-3007

Electric Variable Speed Wet Stone Polisher WSP-3007 is an electric variable speed wet stone polisher, is frequently used to polish surfaces and edges of natural stone, quartz, engineered stone (sink holes, stone or concrete counter top edges, and other small stone surfaces).

  • Detailed Specification
  • FAQ


    Electric Variable Speed Wet Stone Polisher WSP-3007


    Brief introduction

    5”Wet polisher with central water feed

    1. The WSP-3007 is the most popular electric wet polisher in stone industry. It is a very nice and powerful wet polisher for fabricators. Due to its light weight and portability, this wet polisher has become the standard for all WET polishers in stone and concrete countertops.

    2. The WSP-3007 is frequently used to polish surfaces and edges of natural stone, quartz, engineered stone (sink holes, stone or concrete counter top edges, and other small stone surfaces).

    3. The WSP-3007 has the advantage of VTC electronic speed control .even at high load conditions to maintain rated speed, humanity designed handle, ground fault circuit, central water feed, splash guard.

    4" or 5" Velcro backer pads and diamond resin polishing pads are to be purchased separately.


    Features:

    1. constant Power Constant Speed.

    2. use for wet or dry polishing of marble, granite, stone and concrete surface with wet or dry diamond polishing pads.

    3. quick water connectors and the C-Handle for easy operation.

    4. the machine will be equipped with GFCI (Ground Fault Circuit Interrupter) safety feature which will goes off when water enters inside the machine cover and preventing the operator from receiving electric shocks.

    5. the RPM range reduces heat build-up when polishing engineered stone, which eliminates burning or scorching the work piece.

    6. compact design for hand held but it's powerful working.


    Specification:

    Item No.: WSP-3007 

    Voltage: 220v/110v 

    Output Power: 900w 

    Max.disc Diameter: 4"/100mm - 5"/125mm 

    No-load Speed: 500-4500rpm 

    Thread: M14 or /5/8"-11 

    Gross /Net. Weight:  5.0KG/4.5KG 

    Packing Size & Piece: 57*37*30cm/6PCS 


    Details Images:

    Electric Variable Speed Wet Stone Polisher WSP-007

    Electric Variable Speed Wet Stone Polisher WSP-007

    Electric Variable Speed Wet Stone Polisher WSP-007

    Electric Variable Speed Wet Stone Polisher WSP-007

    Electric Variable Speed Wet Stone Polisher WSP-007


    Accessories

    Electric Variable Speed Wet Stone Polisher WSP-3007

    Carbon Brush: 1 set 

    Big Wrench:  1 pc

    Wrench:  1 pc 

    Handle:  1 pc

    Water Pipe: 1 pc 

    Water Faucet: 1 pc

    Mud Mask: 1 pc 


    Note:

    1. Do not force the power tool.

    2. Do not use tool if switch does not turn it on or off.

    3. Disconnect the plug from power source before making any adjustments, changing accessories,or storing the tool.

    4. Store idle tools out of the reach of children and not  allow persons unfamiliar  with the  power tool or these instructions to operate the power tool.

    5. Maintain power tool.

    6. Keep cutting tools sharp and clean

    7. Use the power tool, accessories and tool bots etc. om accordance with these instructions and in the  manner intended for the particular type of power tool,taking into account the working conditions and the work to be performed.

    Electric Variable Speed Wet Stone Polisher WSP-007


Your Questions and Comments are Important to Us.

Fill in the Following Form, or Reach Us by Phone or E-mail.

Contact Us
Get in Touch
Follow Us

Copyright © Guangzhou Yulin Leading Co., Ltd
All Rights Reserved  

sitemap
Top