Description:
1200W Big Power Electric Variable Speed Wet Stone Polisher WSP-3021
1. For marble, granite, quartz, concrete counter tops, engineered stone and other stones.
2. Flat finish, fast and easy to operate
3. Can be equipped with 220V or 110V polisher and grinder.
4. Designed to produce a flat, swirl free finish on counter tops, floors, walls and steps.
5. Use coated abrasives, diamond polishing systems, light weight diamond wheels or brushes to grind, hone, polish or clean concrete, terrazzo, marble or granite surfaces.
6. Wet is available.
7. Max. Disc Diameter: 6"/150mm.
Feature:
1. This WSP-3021 stone wet polisher is highly versatile, variable speed. This stone wet polisher is made and performs like an expensive European machine but at a fraction of the cost.
2. Made from the exact same high torque motor used to drive our 3 head planetary polisher WSP-3021, this 1200W machine will tackle every project imaginable, from bullnose profiling, heavy grinding, cutting and polishing.
3. With a variable speed control switch with auto speed feedback to maintain consistent RPM under load. Having water intake located under the machine giving the user complete control of their work, unlike inferior machines where the water supply is on top of the machine which gets in the way and leaks onto the machine over time.
4. With the ultimate speed range of 700 – 3000 RPM, the fabricators enjoy complete comfort and control over their work, wiping off burning and scorching when working with materials, the speed controller is also ergonomically located above the trigger allowing the fabricator to adjust the speed on the fly rather than stopping to adjust the speed.
5. Water flow is also completely controllable with the tap located near the trigger allowing the user to have full control over how much water is being used (if at all) essential for those who prefer to polish wet to dry on the final grits. For dry work only, simply don’t connect to water.
6. Another great feature is the ergonomic handgrip which gives the user maximum comfort and control while using the machine, this grip alone gives this machine several advantages over other models. When polishing you want all the pressure directly under the output spindle for several reasons, above, below or to the side and the user will need to compensate the pressure bias using the other hand. Having the pressure directly above the output significantly reduces wrist fatigue but also frees up the second hand to control the angle of the machine relative to your work. The handgrip also reassess the lock button so the user doesn’t accidently engage the lock while working.
7. With this purchase including:
• 1200W Wet Variable Speed Wet Polisher
• 3m Power Cable with GFCI (Australian Standard Circuit Protector)
• Brass Water Diffuser Integrated Arbor
• 3m Water Lines with Brass Adjustment
• Tap and Brass Hose Fitting
• 5"/125mm Splash guard and Clamp
• Additional Straight Handel for use a Angle Grinder
Specification
Item No.: WSP-3021
Rated Voltage: 230V/110V
Rated Frequency: 50/60HZ
Rated Input Power: 1200W
Max.Disc Diameter: 6"/150mm
No-load Speed: 500-2800RPM
Output Shaft Thread: M14 or 5/8"-11
G.W/N.W: 5/4.3KG
Material of Spindle Coil: Copper
Packing Size& Pieces: 56.5×36.5×30CM/4PCS
Details Images:
Accessories:
Carbon Brush: 1 set
Wrench: 2 pcs
Handle: 2pcs
Water Pipe: 1 pc
Mud Mask: 1 pc
Note:
1, Do not force the power tool.
2. Do not use tool if switch does not turn it on or off.
3. Disconnect the plug from power source before making any adjustments, changing accessories or storing the tool.
4. Store idle tools out of the reach of children and not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
5. Maintain power tool.
6. Keep cutting tools sharp and clean
7. Use the power tool,accessories and tool bots etc. om accordance with these instructions and in the manner intended for the particular type of power tool,taking into account the working conditions and the work to be performed.
